How To Install Blink Outdoor Camera Outside

2 min read 25-11-2024

How To Install Blink Outdoor Camera Outside

Installing your Blink Outdoor Camera outside is a smart move to enhance your home security. This guide will walk you through the entire process, ensuring you get the best performance from your camera. Follow these steps to set up your Blink Outdoor Camera effectively.

What You Will Need

Before you begin, gather the necessary tools and materials:

Blink Outdoor Camera
Mounting bracket
Screws and anchors (included)
A drill and drill bits
Screwdriver
A pencil or marker
Level (optional)
Your smartphone with the Blink app installed

Step 1: Choose the Right Location

The first step in the installation process is selecting the best location for your Blink Outdoor Camera. Here are some factors to consider:

Coverage Area: Aim for a spot that covers entry points, pathways, and driveways.
Height: Mount the camera at least 8 feet high for optimal field of vision and protection from tampering.
Power Source: Ensure the area is within range of your Wi-Fi network, as well as any existing power outlets if you plan to use a plug-in module.

Tip: Always test the Wi-Fi signal strength in the desired location using your smartphone prior to installation.

Step 2: Mark the Mounting Holes

Once you've identified the ideal mounting location, use the mounting bracket as a template:

Hold the mounting bracket against the wall where you want to install the camera.
Use a pencil or marker to mark the holes where the screws will go.

Step 3: Drill Pilot Holes

Now, it’s time to drill:

Using the appropriate drill bit, drill pilot holes into the marked spots.
If you're using anchors (for drywall or brick), insert them into the pilot holes.

Step 4: Attach the Mounting Bracket

With your pilot holes ready, it’s time to attach the mounting bracket:

Align the bracket over the holes or anchors.
Secure it using the provided screws and a screwdriver. Ensure it is stable and level.

Step 5: Attach the Blink Outdoor Camera

Now that the bracket is securely in place, attach the Blink Outdoor Camera:

Position the camera on the mounting bracket.
Ensure it clicks into place and is securely attached.

Step 6: Set Up the Blink App

To connect your camera to your Blink system, you’ll need the Blink app:

Open the Blink app on your smartphone.
Follow the prompts to add your new camera to your existing system. You will likely need to scan a QR code on the back of the camera.
Ensure your Blink camera is connected to your Wi-Fi network successfully.

Step 7: Adjust Camera Settings

Before finishing up, adjust the camera settings:

Set your desired motion detection, sensitivity levels, and alerts.
Customize the camera view using the app so you capture what's important.

Step 8: Test the Camera

Finally, test your Blink Outdoor Camera to ensure everything is working correctly:

Walk in front of the camera to check motion detection.
Ensure you receive alerts on your smartphone.
View the live feed and recorded clips through the app.

Conclusion

Congratulations! You’ve successfully installed your Blink Outdoor Camera outside. By following this step-by-step guide, you can ensure your home is better protected. Remember to regularly check the camera settings and battery status to maintain optimal performance. For more tips and troubleshooting, refer to the Blink support page or user manuals.

Additional Resources

By installing your Blink Outdoor Camera properly, you can enjoy peace of mind knowing your home is monitored and secure. Happy monitoring!