How To Change Battery In Ford Key Fob 2017

Savager Indie vor

2 min read

·

23-11-2024

2

0

Share

Replacing the battery in your 2017 Ford key fob is a simple process that can save you a trip to the dealership. This guide provides step-by-step instructions with pictures to help you through the process. Knowing how to replace your car key battery yourself can save you time and money.

What You'll Need

Before you begin, gather these items:

• A new CR2032 battery: This is the standard battery type for most Ford key fobs. You can find these at most pharmacies, grocery stores, and online retailers.
• A small flathead screwdriver (optional): While not always necessary, a small flathead can be helpful for prying open the key fob.

Step-by-Step Guide to Replacing Your 2017 Ford Key Fob Battery

Step 1: Accessing the Key Fob Battery Compartment

1. Locate the release button: Examine your key fob carefully. There's usually a small, inconspicuous button or tab on the side or back. This button is the key to opening the fob.

2. Press and slide: Gently press the release button. While holding it down, carefully slide the key fob apart. The two halves should separate. If you encounter resistance, use a small flathead screwdriver (or your fingernail) to gently pry the two halves apart. Be careful not to damage the plastic casing.

   (Insert image here: Close-up image of the 2017 Ford key fob showing the release button clearly labeled)

Step 2: Removing the Old Battery

1. Locate the battery: Once the key fob is open, you should see the CR2032 battery. It's typically held in place by a small metal clip.

2. Remove the battery: Gently pry the battery out of its compartment. Some key fobs might require you to lift the battery from its housing using your fingernail or a flathead screwdriver. Avoid touching the battery's terminals.

   (Insert image here: Close-up image of the open key fob showing the location of the battery and how to remove it)

Step 3: Installing the New Battery

1. Insert the new battery: Carefully place the new CR2032 battery into the compartment. Make sure the positive (+) side is facing up (usually indicated by a "+" symbol on the battery or the compartment).

2. Check the alignment: Ensure the battery is correctly seated and flush with the compartment.

   (Insert image here: Close-up image showing the correct placement of the new battery)

Step 4: Reassembling the Key Fob

1. Snap the halves together: Carefully align the two halves of the key fob and press them together firmly. They should snap back into place with a satisfying click.

2. Test the functionality: After reassembling the key fob, test the buttons to ensure they're working correctly. Try locking and unlocking your car. Check the panic button too.

Troubleshooting

• Key fob not working after battery replacement: Double-check that the new battery is correctly installed and that its positive (+) side is facing up. If it still doesn't work, the battery may be defective. Try replacing it with a new one.

• Difficulty separating the key fob halves: If you're having trouble separating the two halves, use a small, flat-bladed tool (such as a thin flathead screwdriver or a guitar pick) to carefully pry them apart.

Conclusion

Changing the battery in your 2017 Ford key fob is a straightforward process. By following these simple steps, you can save yourself time and money. Remember to always use a CR2032 battery, and ensure it's correctly installed. If you continue to experience issues, consult your owner's manual or contact a professional.

(Remember to replace the bracketed image placeholders with actual images.)